Expert Answers about Dutchmen Kodiak Ultimate Travel Trailer
- Grease Seals for 2018 Dutchmen Kodiak Ultra Light Travel Trailer
- The Grease Seals # RG06-050 are the ones most likely to fit your 2018 Dutchmen Kodiak Travel Trailer.
You can confirm this by removing the hubs ahead of time(This is recommended so that you can inspect the bearings to see if you will require those as well). You will generally be able to find the measurement stamped into the seal. If you are unable to read the measurement you can see the article linked below on how to measure for that seal as well as the bearings and races.
When you...
view full answer... - Availability of a Trailer Axle With at Least 5,000LB Capacity and 86-1/2" Hub Face To Hub Face
- We do have the Dexter 5,200lb Trailer Axle w/ Electric Brakes # 8327816-EB which matches your current axle hub face to hub face of 86-1/2". This axle includes the 12" drum brake assemblies and it will increase you to the 6 on 5-1/2" bolt pattern. You will need to have 2 new Spring Seats # TRSS300 welded on at your 68.5" measurement on top of the axle as well since the spring seats on this axle are 71-1/2" on center and located on the bottom of the axle for an underslung design.
To attach...
view full answer... - Determining The Correct Baggage Slam Latch For A 2017 Dutchmen Kodiak Ultimate 288BHSL
- Manufacturers do not list the part numbers they use so we have no way of looking up the specific match but we can measure the cutout hole to determine the correct replacement.
To do this you'll just need to remove the backing plate from the slam latch and measure the height and width of the hole. With that measurement we can fins a corresponding fit.
For example, the Global Link RV Baggage Door Slam Latch # 295-000078 you were looking at has a recommended cutout hole of 3-7/8" wide...
view full answer... - Can 3,500 lb Hub and Drum Be Used for 4,400 lb Lippert Axle
- We have it, the etrailer Hub and Drum # AKHD-655-35-EZ-K, listed out for a 3,500 lb axle (and we break the math down on the product page) but when it comes to the hub side of things it's more about making sure it physically fits so since the bearings and seal match what you have with your #84 spindle, this hub will safely work with your 4,400 lb axles.
view full answer... - Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- For your application you need the Pre-Greased Easy Grease Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K. This matches all of the specs you mentioned and while it's only rated for 3.5K axles, it will still work for your Lippert 4.4K axle since all of the bearings and bolt pattern match up. The weight rating is more like a guide when it comes to looking at weight ratings.
view full answer... - Auto Level Operation Of The Lippert Electric Ground Control TT Automatic Leveling System
- The tongue jack for your Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 is supposed to lift up so that the other jacks can properly level out your trailer and does require you to go back and lower the tongue jack once the others are set in place.
view full answer...
Go To Results